YGTS4-8 & YGTS5-12 CNC Hydraulic Straightening and Cutting Machine
YGTS4-8 & YGTS5-12 CNC Hydraulic Straightening and Cutting Machine

YGTS4-8 & YGTS5-12 CNC Hydraulic Straightening and Cutting Machine

From $1,000

CNC hydraulic straightening and cutting machine for Φ4–12 mm rebar, cutting 100–6000 mm.

Category:

From $1,000

⚙
Customization availableAll parameters can be tailored to your production requirements. The final price is quoted according to your confirmed specifications.

Overview

CNC controlled hydraulic straightening and cutting machines for rebar and wire. The YGTS4-8 handles Φ4–8 mm and the YGTS5-12 handles Φ4–12 mm, both with automatic cutting length from 100 mm to 6000 mm and straightening accuracy within 1 mm/m.

Key Features

  • CNC control with programmable cutting length
  • Hydraulic cutting — clean square cut
  • Straightening accuracy ≤ 1 mm/m
  • Cutting length 100–6000 mm, error ≤ 1 mm
  • Straightening speed up to 30 m/min

Technical Specifications

Model YGTS4-8 YGTS5-12
Straighten the dia. of steel bars Φ4–Φ8 mm Φ4–Φ12 mm
Automatic cutting length Φ100–Φ6000 mm Φ100–Φ6000 mm
Cutting length error ≤ 1 mm ≤ 1 mm
Straightening accuracy ≤ 1 mm/m ≤ 1 mm/m
Straightening speed ≤ 30 m/min ≤ 30 m/min
Straightening motor power 7 kW 11 kW

Send us your wire diameter range, material and required output — our engineers will confirm the exact specification and quote within 24 hours.

Reviews

There are no reviews yet.

Be the first to review “YGTS4-8 & YGTS5-12 CNC Hydraulic Straightening and Cutting Machine”

Your email address will not be published. Required fields are marked *

Related products

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

What wire diameter range can these machines handle?

The range runs from small wire around 1.2 mm up to 25 mm rebar, depending on the model. Each machine has a stated straightening diameter range and cutting length range, both of which should be confirmed in writing before ordering.

How accurate is the cutting length?

Cutting length tolerance varies by model. Smaller machines are typically rated to about plus or minus 1 mm, while larger hub and hydraulic machines are commonly rated to within 5 mm. Straightening accuracy is usually stated separately, around 1 mm per metre.

Can it cut both round and threaded rebar?

Yes. Several models in the range are built for both round steel and threaded steel, and profile machines can also handle square, hexagonal and flat steel with the appropriate tooling. Confirm the material you need when specifying.

What is the difference between the hub type and the CNC hydraulic type?

Hub type machines use a rotating hub to straighten wire and are suited to a wide diameter range at moderate speed. CNC hydraulic machines use hydraulic cut-off with programmable length control, which suits repeat production runs and higher accuracy requirements.

How fast do they run?

Straightening speed is typically up to about 30 m/min on the larger machines, with small wire machines running faster. Actual output depends on cut length as much as line speed, since short cuts mean more cutting cycles per metre.

Can the machine be configured for our production line?

Yes. Cutting length range, motor power, voltage and control configuration can all be specified. Most machines in this range are built to order rather than supplied from stock.

Scroll to Top