I-wheel Take-up Machine (400 / 630 / 800)

I-wheel Take-up Machine (400 / 630 / 800)

From $1,000

I-wheel take-up machines in 400, 630 and 800 mm sizes, 100–800 m/min.

Category:

From $1,000

⚙
Customization availableAll parameters can be tailored to your production requirements. The final price is quoted according to your confirmed specifications.

Overview

A range of I-wheel take-up machines covering wire diameters from 0.3 mm to 4 mm across three wheel sizes. Light-pole traverse with adjustable cable spacing from 1 to 40 mm, and collection speed from 100 to 800 m/min.

Key Features

  • Three sizes: 400, 630, 800 mm
  • Wire range 0.3–4 mm
  • Collection speed 100–800 m/min
  • Light-pole traverse
  • Cable spacing 1–40 mm adjustable

Technical Specifications

Model 400 630 800
Dia. of I-shaped wheel (mm) 400 630 800
Wire dia. (mm) 0.3–0.9 0.9–2.2 1.6–4
Range of wire collection speed (m/min) 100–800 100–800 100–800
Traverse method Light pole wiring Light pole wiring Light pole wiring
Cable spacing 1–40 mm adjustable 1–40 mm adjustable 1–40 mm adjustable

Send us your wire diameter range, material and required output — our engineers will confirm the exact specification and quote within 24 hours.

Reviews

There are no reviews yet.

Be the first to review “I-wheel Take-up Machine (400 / 630 / 800)”

Your email address will not be published. Required fields are marked *

Related products

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I match take-up capacity to my drawing machine?

Match it to the coil weight you actually handle. If the pay-off accepts 2.3 tons but the take-up fills at 800 kg, the line stops frequently. Line speed is also limited by the take-up, so an undersized take-up means the drawing machine never reaches its rated speed.

What is the difference between an I-wheel and an elephant trunk take-up?

An I-wheel take-up spools the finished wire onto a reel, which suits transport and storage. An elephant trunk take-up coils wire without a spool, which suits downstream processing where the coil is fed directly into another machine.

What spool sizes are available?

I-wheel take-up machines are available in 400, 630, 800 and 850 mm reel sizes, and vertical I-wheel units up to 1150 mm for large spools and heavy coils. The right size depends on the coil weight you need to handle.

Do I need equipment to move full spools?

Yes. A large vertical take-up produces a spool that needs handling equipment to move. If you do not have that equipment, a smaller I-wheel machine is the practical choice even where a larger one would be more efficient.

Can the take-up run continuously with the drawing machine?

It can, provided capacities are matched and the take-up speed follows the line speed. Tension control between the drawing machine and take-up matters, particularly on fine wire.

Is the take-up supplied with the drawing machine or separately?

Either. Take-up and pay-off equipment can be specified as part of a complete line or supplied separately to match a machine you already have. Give us the existing machine specification so the interface matches.

Scroll to Top