LT-11/450 Water-tank Wire Drawing Machine

LT-11/450 آلة سحب الأسلاك ذات خزان الماء

من $1,000

آلة سحب الأسلاك بخزان مائي، من قطر الدخول Φ4.0–3.0 mm إلى قطر الخروج Φ1.6–1.2 mm بسرعة 400 m/min.

التصنيف:

From $1,000

⚙
التخصيص متاحيمكن تخصيص جميع المعلمات وفقاً لمتطلبات الإنتاج لديك. يتم تقديم السعر النهائي وفقاً للمواصفات المؤكدة لديك.

نظرة عامة

آلة سحب رطبة متوسطة الحجم ببكرة Φ450 mm و11 قالب سحب ومحرك بقدرة 30–45 kW. مناسبة لإنتاج أسلاك اللحام وموصلات الكابلات حيث تكون نظافة السطح مهمة.

الميزات الرئيسية

  • قطر بكرة Φ450 mm
  • سرعة سحب 400 m/min
  • محرك بقدرة 30–45 kW
  • سحب رطب لسطح نظيف
  • مدمج وسهل الصيانة

المواصفات الفنية

الطراز LT-11/450
أقصى قطر دخول Φ4.0–3.0 mm
الحد الأدنى لقطر الخروج Φ1.6–1.2 mm
قطر البكرة Φ450 mm
سرعة السحب 400 m/min
قدرة المحرك 30–45 kW

أرسل لنا نطاق قطر السلك والمواد والإنتاج المطلوب — سيؤكد مهندسونا المواصفات الدقيقة ويقدموا عرض سعر خلال 24 ساعة.

المراجعات

لا توجد مراجعات بعد.

كن أول من يقيم “LT-11/450 آلة سحب الأسلاك ذات خزان الماء”

Your email address will not be published. Required fields are marked *

منتجات ذات صلة

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I choose the right wire drawing machine?

It comes down to inlet diameter, finished diameter, material and target output. A machine is defined by what goes in and what comes out; the number of dies has to match the total reduction you need. Send us those four details and we will confirm which series fits.

Can the machine be built for our voltage?

Yes. Machines are configured for your site supply. Tell us the voltage, phase and frequency before production starts, because a machine built for 380 V / 50 Hz will not run on 440 V / 60 Hz without changing motors and drives.

What is the lead time and how is it shipped?

Lead time is counted from the date the deposit clears and the specification is confirmed. Machines are packed for sea freight using export-grade packing. Quotations are usually issued on FOB or CIF terms, and both are stated in writing.

Are drawing dies included?

Dies are consumable and are usually quoted separately. If a quotation mentions dies without stating how many or of what grade, ask before you compare prices, because die specification changes the cost significantly.

What spare parts are available and for how long?

We supply spare and wear parts for the machines we sell, generally for at least 5 years after the model is supplied. Quote the model and machine serial number when ordering so compatibility can be confirmed.

What does the warranty cover?

12 months from arrival at the destination port, covering manufacturing defects in materials and workmanship under normal operating conditions. Consumable parts such as dies, belts, bearings and seals are excluded.

Scroll to Top