GT4-14 Machine automatique à redresser et couper les barres d'armature

GT4-14 Machine automatique à redresser et couper les barres d’armature

À partir de $1,000

Redressage et coupe automatiques de barres d’armature, 4-14mm, automate programmable + servomoteur, précision de plus/moins 1mm.

UGS : SC-GT414 Catégorie :

From $1,000

⚙
Personnalisation disponibleTous les paramètres peuvent être adaptés à vos exigences de production. Le prix final est établi selon vos spécifications confirmées.

Aperçu

La GT4-14 est une machine automatique à redresser et couper les barres d’armature à haut rendement, traitant des barres rondes et des barres déformées de 4-14mm. Contrôlée par automate programmable avec servomoteur pour une découpe de longueur précise (précision de ±1mm).

Caractéristiques principales

  • Commande par automate programmable + servomoteur pour une découpe de précision
  • Alimentation continue, haute efficacité 30-45 pcs/min
  • Comptage automatique de longueur et réglage des lots
  • Lames de coupe trempées, longue durée de vie
  • Conception compacte, facile à déplacer sur le chantier
  • Fonctionnement à faible bruit (moins de 75dB)

Applications

Traitement des armatures sur chantier, usines de béton préfabriqué, centres de distribution d’armatures.

Avis

Il n’y a pas encore d’avis.

Soyez le premier à laisser votre avis sur “GT4-14 Machine automatique à redresser et couper les barres d’armature”

Your email address will not be published. Required fields are marked *

Produits similaires

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

What wire diameter range can these machines handle?

The range runs from small wire around 1.2 mm up to 25 mm rebar, depending on the model. Each machine has a stated straightening diameter range and cutting length range, both of which should be confirmed in writing before ordering.

How accurate is the cutting length?

Cutting length tolerance varies by model. Smaller machines are typically rated to about plus or minus 1 mm, while larger hub and hydraulic machines are commonly rated to within 5 mm. Straightening accuracy is usually stated separately, around 1 mm per metre.

Can it cut both round and threaded rebar?

Yes. Several models in the range are built for both round steel and threaded steel, and profile machines can also handle square, hexagonal and flat steel with the appropriate tooling. Confirm the material you need when specifying.

What is the difference between the hub type and the CNC hydraulic type?

Hub type machines use a rotating hub to straighten wire and are suited to a wide diameter range at moderate speed. CNC hydraulic machines use hydraulic cut-off with programmable length control, which suits repeat production runs and higher accuracy requirements.

How fast do they run?

Straightening speed is typically up to about 30 m/min on the larger machines, with small wire machines running faster. Actual output depends on cut length as much as line speed, since short cuts mean more cutting cycles per metre.

Can the machine be configured for our production line?

Yes. Cutting length range, motor power, voltage and control configuration can all be specified. Most machines in this range are built to order rather than supplied from stock.

Défiler vers le haut