LT-11/450 Water-tank Wire Drawing Machine

LT-11/450 Machine à tréfiler à bac d’eau

À partir de $1,000

Machine à tréfiler à bac d’eau, diamètre d’entrée Φ4.0–3.0 mm à diamètre de sortie Φ1.6–1.2 mm à 400 m/min.

Catégorie :

From $1,000

⚙
Personnalisation disponibleTous les paramètres peuvent être adaptés à vos exigences de production. Le prix final est établi en fonction de vos spécifications confirmées.

Aperçu

Machine à tréfiler humide de taille moyenne avec bobine Φ450 mm, 11 filières et entraînement 30–45 kW. Adaptée à la production de fil de soudage et de conducteurs de câble lorsque la propreté de surface est importante.

Caractéristiques principales

  • Diamètre de bobine Φ450 mm
  • Vitesse de traction 400 m/min
  • Moteur 30–45 kW
  • Tréfilage humide pour une surface propre
  • Compact et facile à entretenir

Spécifications techniques

Modèle LT-11/450
Diamètre d’entrée max. Φ4.0–3.0 mm
Diamètre de sortie min. Φ1.6–1.2 mm
Diamètre de bobine Φ450 mm
Vitesse de tirage 400 m/min
Puissance moteur 30–45 kW

Envoyez-nous votre plage de diamètres de fil, le matériau et la production requise — nos ingénieurs confirmeront la spécification exacte et vous feront parvenir un devis sous 24 heures.

Avis

Il n’y a pas encore d’avis.

Soyez le premier à laisser votre avis sur “LT-11/450 Machine à tréfiler à bac d’eau”

Your email address will not be published. Required fields are marked *

Produits similaires

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I choose the right wire drawing machine?

It comes down to inlet diameter, finished diameter, material and target output. A machine is defined by what goes in and what comes out; the number of dies has to match the total reduction you need. Send us those four details and we will confirm which series fits.

Can the machine be built for our voltage?

Yes. Machines are configured for your site supply. Tell us the voltage, phase and frequency before production starts, because a machine built for 380 V / 50 Hz will not run on 440 V / 60 Hz without changing motors and drives.

What is the lead time and how is it shipped?

Lead time is counted from the date the deposit clears and the specification is confirmed. Machines are packed for sea freight using export-grade packing. Quotations are usually issued on FOB or CIF terms, and both are stated in writing.

Are drawing dies included?

Dies are consumable and are usually quoted separately. If a quotation mentions dies without stating how many or of what grade, ask before you compare prices, because die specification changes the cost significantly.

What spare parts are available and for how long?

We supply spare and wear parts for the machines we sell, generally for at least 5 years after the model is supplied. Quote the model and machine serial number when ordering so compatibility can be confirmed.

What does the warranty cover?

12 months from arrival at the destination port, covering manufacturing defects in materials and workmanship under normal operating conditions. Consumable parts such as dies, belts, bearings and seals are excluded.

Défiler vers le haut