GW-40 Máquina dobladora de barras de refuerzo

Desde $1,000

Máquina dobladora de barras corrugadas estándar de 6-40mm, accionamiento por engranajes, ángulo de 0-180 grados, portátil para obra.

SKU: BM-GW40 Categoría: Máquina dobladora

From $1,000

Descripción
Valoraciones (0)

⚙

Personalización disponibleTodos los parámetros se pueden adaptar a sus requisitos de producción. El precio final se cotiza de acuerdo con sus especificaciones confirmadas.

Descripción general

La GW-40 es una máquina dobladora de barras corrugadas de servicio estándar para procesar barras redondas de 6-40mm. Un diseño mecánico simple garantiza fiabilidad y fácil mantenimiento en obras de construcción.

Características principales

Sistema de transmisión por engranajes endurecidos
Pedal y control manual
Ángulo de doblado ajustable (0-180 grados)
Disco giratorio con múltiples pasadores de doblado
Compacta y portátil para uso en obra
Protección contra sobrecarga

Aplicaciones

Doblado general de barras de refuerzo en construcción, fabricación de estribos, trabajos de cimentación y construcción de puentes.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “GW-40 Máquina dobladora de barras de refuerzo”

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

Frequently Asked Questions

What rebar diameter can these bending machines handle?

The range covers construction steel from about 6 mm up to 50 mm, depending on the model. Each machine has a stated maximum bending diameter that should be confirmed against the steel you actually use.

What is the difference between manual and CNC bending machines?

Manual machines use mechanical stops and are set up by hand for each bend angle. CNC machines store bend programs and run repeat sequences, which suits production work where the same shapes are bent repeatedly.

How many bends can be programmed?

Programmable bend count and angle storage depend on the CNC model and control system. Confirm the specification for the model you are considering against the shapes you need to produce.

Can it bend both directions?

Bending direction capability depends on the machine design. Confirm whether the model you are considering supports forward and reverse bending for the shapes you need.

What is the bending accuracy?

Bending angle accuracy depends on the control system and the material being bent. Steel grade and diameter both affect springback, so the program may need adjustment for different material.

Does it include bending pins and tooling?

Tooling supply varies by model and should be confirmed in the quotation. Bending pins, centre pins and dies are the parts most often quoted separately.