LT-11/350 Water-tank Wire Drawing Machine

Máquina trefiladora de tanque de agua LT-11/350

Desde $1,000

Máquina trefiladora compacta de tanque de agua con carrete de Φ350 mm para alambre fino.

Categoría:

From $1,000

⚙
Personalización disponibleTodos los parámetros se pueden adaptar a sus requisitos de producción. El precio final se cotiza según sus especificaciones confirmadas.

Descripción general

Versión más pequeña de la serie LT de tanque de agua con carrete de Φ350 mm, adecuada para alambre fino donde el espacio en el suelo es limitado. El accionamiento de 30–37 kW proporciona 350 m/min.

Características principales

  • Carrete de Φ350 mm — ocupación compacta
  • Velocidad de tracción de 350 m/min
  • Motor de 30–37 kW
  • Trefilado en húmedo
  • Adecuada para alambre fino y alambre para resortes

Especificaciones técnicas

Modelo LT-11/350
Diámetro máximo de entrada Φ2.8–2.5 mm
Diámetro de salida mínimo Φ1.6–1.2 mm
Diámetro del carrete Φ350 mm
Velocidad de tracción 350 m/min
Potencia del motor 30–37 kW

Envíenos su rango de diámetro de alambre, material y producción requerida — nuestros ingenieros confirmarán la especificación exacta y enviarán una cotización en un plazo de 24 horas.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Máquina trefiladora de tanque de agua LT-11/350”

Your email address will not be published. Required fields are marked *

Productos relacionados

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I choose the right wire drawing machine?

It comes down to inlet diameter, finished diameter, material and target output. A machine is defined by what goes in and what comes out; the number of dies has to match the total reduction you need. Send us those four details and we will confirm which series fits.

Can the machine be built for our voltage?

Yes. Machines are configured for your site supply. Tell us the voltage, phase and frequency before production starts, because a machine built for 380 V / 50 Hz will not run on 440 V / 60 Hz without changing motors and drives.

What is the lead time and how is it shipped?

Lead time is counted from the date the deposit clears and the specification is confirmed. Machines are packed for sea freight using export-grade packing. Quotations are usually issued on FOB or CIF terms, and both are stated in writing.

Are drawing dies included?

Dies are consumable and are usually quoted separately. If a quotation mentions dies without stating how many or of what grade, ask before you compare prices, because die specification changes the cost significantly.

What spare parts are available and for how long?

We supply spare and wear parts for the machines we sell, generally for at least 5 years after the model is supplied. Quote the model and machine serial number when ordering so compatibility can be confirmed.

What does the warranty cover?

12 months from arrival at the destination port, covering manufacturing defects in materials and workmanship under normal operating conditions. Consumable parts such as dies, belts, bearings and seals are excluded.

Scroll al inicio