LWX1-6/350 & LWX1-6/450 Pulley Type Wire Drawing Machine

LWX1-6/350 y LWX1-6/450 Máquina trefiladora tipo polea

Desde $1,000

Máquina trefiladora de tipo polea para diámetros de alambre pequeños a medianos, hasta 400 m/min.

Categoría:

From $1,000

⚙
Personalización disponibleTodos los parámetros se pueden adaptar a sus requisitos de producción. El precio final se cotiza de acuerdo con sus especificaciones confirmadas.

Descripción general

Las LWX1-6/350 y LWX1-6/450 son máquinas trefiladoras compactas de tipo polea para diámetros de alambre más pequeños. Su diámetro de cabrestante más pequeño permite una mayor velocidad de salida mientras mantiene una tensión estable. Ideales para líneas de producción de alambre fino donde el espacio de piso es limitado.

Características clave

  • Bastidor compacto — opciones de cabrestante de 350 mm y 450 mm
  • Alta velocidad de salida de hasta 400 m/min
  • Bajo consumo de energía para el trefilado de alambre fino
  • Diseño de cambio rápido de hilera
  • Brazo de tensión y detección de rotura de alambre opcionales

Especificaciones técnicas

Modelo LWX1-6/450 LWX1-6/350
Potencia del motor individual 11–15 kW 4–7.5 kW
Diámetro del carrete 450 mm 350 mm
Diámetro máximo de entrada 4–3 mm 3–2 mm
Diámetro mínimo de salida 1.6–1.2 mm 1.4–0.95 mm
Velocidad de salida 360 m/min 400 m/min

Envíenos su rango de diámetro de alambre, material y producción requerida — nuestros ingenieros confirmarán la especificación exacta y cotizarán en 24 horas.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “LWX1-6/350 y LWX1-6/450 Máquina trefiladora tipo polea”

Your email address will not be published. Required fields are marked *

Productos relacionados

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I choose the right wire drawing machine?

It comes down to inlet diameter, finished diameter, material and target output. A machine is defined by what goes in and what comes out; the number of dies has to match the total reduction you need. Send us those four details and we will confirm which series fits.

Can the machine be built for our voltage?

Yes. Machines are configured for your site supply. Tell us the voltage, phase and frequency before production starts, because a machine built for 380 V / 50 Hz will not run on 440 V / 60 Hz without changing motors and drives.

What is the lead time and how is it shipped?

Lead time is counted from the date the deposit clears and the specification is confirmed. Machines are packed for sea freight using export-grade packing. Quotations are usually issued on FOB or CIF terms, and both are stated in writing.

Are drawing dies included?

Dies are consumable and are usually quoted separately. If a quotation mentions dies without stating how many or of what grade, ask before you compare prices, because die specification changes the cost significantly.

What spare parts are available and for how long?

We supply spare and wear parts for the machines we sell, generally for at least 5 years after the model is supplied. Quote the model and machine serial number when ordering so compatibility can be confirmed.

What does the warranty cover?

12 months from arrival at the destination port, covering manufacturing defects in materials and workmanship under normal operating conditions. Consumable parts such as dies, belts, bearings and seals are excluded.

Scroll al inicio