2.3 Ton Heavy Duty Duckbill Pay-off Rack

Dévidoir robuste à bec de canard 2.3 Ton

À partir de $1,000

Dévidoir à bec de canard pour service intensif, capacité de 2.3 ton, pour un déroulement contrôlé de la bobine.

Catégorie :

From $1,000

⚙
Personnalisation disponibleTous les paramètres peuvent être adaptés à vos exigences de production. Le prix final est établi en fonction de vos spécifications confirmées.

Aperçu

La conception en bec de canard (bec) maintient la bobine par le centre et libère le fil de manière contrôlée, ce qui convient aux lignes nécessitant une tension constante. Capacité de 2.3 tonne.

Caractéristiques principales

  • Capacité de charge de 2.3 ton
  • Conception en bec de canard pour une libération contrôlée
  • Tension de dévidage constante
  • Châssis en acier renforcé
  • Convient aux lignes de tréfilage et de traitement

Spécifications techniques

Capacité 2.3 ton
Type Dévidoir à bec-de-canard
Application Alimentation contrôlée de bobine de fil

Envoyez-nous votre plage de diamètres de fil, le matériau et le débit requis — nos ingénieurs confirmeront la spécification exacte et le devis sous 24 heures.

Avis

Il n’y a pas encore d’avis.

Soyez le premier à laisser votre avis sur “Dévidoir robuste à bec de canard 2.3 Ton”

Your email address will not be published. Required fields are marked *

Produits similaires

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I match take-up capacity to my drawing machine?

Match it to the coil weight you actually handle. If the pay-off accepts 2.3 tons but the take-up fills at 800 kg, the line stops frequently. Line speed is also limited by the take-up, so an undersized take-up means the drawing machine never reaches its rated speed.

What is the difference between an I-wheel and an elephant trunk take-up?

An I-wheel take-up spools the finished wire onto a reel, which suits transport and storage. An elephant trunk take-up coils wire without a spool, which suits downstream processing where the coil is fed directly into another machine.

What spool sizes are available?

I-wheel take-up machines are available in 400, 630, 800 and 850 mm reel sizes, and vertical I-wheel units up to 1150 mm for large spools and heavy coils. The right size depends on the coil weight you need to handle.

Do I need equipment to move full spools?

Yes. A large vertical take-up produces a spool that needs handling equipment to move. If you do not have that equipment, a smaller I-wheel machine is the practical choice even where a larger one would be more efficient.

Can the take-up run continuously with the drawing machine?

It can, provided capacities are matched and the take-up speed follows the line speed. Tension control between the drawing machine and take-up matters, particularly on fine wire.

Is the take-up supplied with the drawing machine or separately?

Either. Take-up and pay-off equipment can be specified as part of a complete line or supplied separately to match a machine you already have. Give us the existing machine specification so the interface matches.

Défiler vers le haut