2.3 Ton Heavy Duty Duckbill Pay-off Rack

Portabobinas robusto tipo pico de pato de 2.3 Ton

Desde $1,000

Portabobinas de pico de pato para trabajo pesado, capacidad de 2.3 ton, para liberación controlada de bobina.

Categoría:

From $1,000

⚙
Personalización disponibleTodos los parámetros se pueden adaptar a sus requisitos de producción. El precio final se cotiza de acuerdo con sus especificaciones confirmadas.

Descripción general

El diseño de pico de pato (pico) sujeta la bobina desde el centro y libera el alambre de forma controlada, lo que se adapta a líneas que requieren tensión constante. Capacidad de 2.3 tonne.

Características principales

  • Capacidad de carga de 2.3 ton
  • Diseño de pico de pato para liberación controlada
  • Tensión estable de desbobinado
  • Bastidor de acero para trabajo pesado
  • Adecuada para líneas de trefilado y procesamiento

Especificaciones técnicas

Capacidad 2.3 ton
Tipo Portabobinas tipo pico de pato
Aplicación Alimentación controlada de bobinas de alambre

Envíenos su rango de diámetro de alambre, material y producción requerida — nuestros ingenieros confirmarán la especificación exacta y la cotización en un plazo de 24 horas.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Portabobinas robusto tipo pico de pato de 2.3 Ton”

Your email address will not be published. Required fields are marked *

Productos relacionados

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I match take-up capacity to my drawing machine?

Match it to the coil weight you actually handle. If the pay-off accepts 2.3 tons but the take-up fills at 800 kg, the line stops frequently. Line speed is also limited by the take-up, so an undersized take-up means the drawing machine never reaches its rated speed.

What is the difference between an I-wheel and an elephant trunk take-up?

An I-wheel take-up spools the finished wire onto a reel, which suits transport and storage. An elephant trunk take-up coils wire without a spool, which suits downstream processing where the coil is fed directly into another machine.

What spool sizes are available?

I-wheel take-up machines are available in 400, 630, 800 and 850 mm reel sizes, and vertical I-wheel units up to 1150 mm for large spools and heavy coils. The right size depends on the coil weight you need to handle.

Do I need equipment to move full spools?

Yes. A large vertical take-up produces a spool that needs handling equipment to move. If you do not have that equipment, a smaller I-wheel machine is the practical choice even where a larger one would be more efficient.

Can the take-up run continuously with the drawing machine?

It can, provided capacities are matched and the take-up speed follows the line speed. Tension control between the drawing machine and take-up matters, particularly on fine wire.

Is the take-up supplied with the drawing machine or separately?

Either. Take-up and pay-off equipment can be specified as part of a complete line or supplied separately to match a machine you already have. Give us the existing machine specification so the interface matches.

Scroll al inicio