Updrawn Anti-aircraft Gun Pay-off Rack

Portabobinas de cañón antiaéreo con tracción ascendente

Desde $1,000

Portabobinas de extracción ascendente con brazo estilo cañón antiaéreo para la extracción vertical del alambre.

Categoría:

From $1,000

⚙
Personalización disponibleTodos los parámetros se pueden adaptar a sus requisitos de producción. El precio final se cotiza según sus especificaciones confirmadas.

Descripción general

Este portabobinas extrae el alambre hacia arriba desde la bobina con un brazo articulado — la disposición tipo “cañón antiaéreo” permite que la guía siga a la bobina mientras se desenrolla, manteniendo la tensión constante a medida que disminuye el diámetro de la bobina.

Características principales

  • Extracción de alambre por tracción ascendente (vertical)
  • El brazo articulado sigue a la bobina
  • Tensión uniforme a medida que se reduce el diámetro de la bobina
  • Construcción robusta en acero
  • Capacidad personalizada disponible

Especificaciones técnicas

Tipo Portabobinas de extracción ascendente tipo cañón antiaéreo
Aplicación Extracción vertical de alambre desde bobinas
Capacidad Personalizado — especifique el peso de la bobina

Envíenos su rango de diámetro de alambre, material y producción requerida — nuestros ingenieros confirmarán la especificación exacta y cotizarán en 24 horas.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Portabobinas de cañón antiaéreo con tracción ascendente”

Your email address will not be published. Required fields are marked *

Productos relacionados

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I match take-up capacity to my drawing machine?

Match it to the coil weight you actually handle. If the pay-off accepts 2.3 tons but the take-up fills at 800 kg, the line stops frequently. Line speed is also limited by the take-up, so an undersized take-up means the drawing machine never reaches its rated speed.

What is the difference between an I-wheel and an elephant trunk take-up?

An I-wheel take-up spools the finished wire onto a reel, which suits transport and storage. An elephant trunk take-up coils wire without a spool, which suits downstream processing where the coil is fed directly into another machine.

What spool sizes are available?

I-wheel take-up machines are available in 400, 630, 800 and 850 mm reel sizes, and vertical I-wheel units up to 1150 mm for large spools and heavy coils. The right size depends on the coil weight you need to handle.

Do I need equipment to move full spools?

Yes. A large vertical take-up produces a spool that needs handling equipment to move. If you do not have that equipment, a smaller I-wheel machine is the practical choice even where a larger one would be more efficient.

Can the take-up run continuously with the drawing machine?

It can, provided capacities are matched and the take-up speed follows the line speed. Tension control between the drawing machine and take-up matters, particularly on fine wire.

Is the take-up supplied with the drawing machine or separately?

Either. Take-up and pay-off equipment can be specified as part of a complete line or supplied separately to match a machine you already have. Give us the existing machine specification so the interface matches.

Scroll al inicio