Máquina automática enderezadora y cortadora de barras corrugadas GT4-14

Máquina automática enderezadora y cortadora de barras corrugadas GT4-14

Desde $1,000

Enderezado y corte automático de barras de refuerzo, 4-14mm, PLC+servo, precisión de ±1mm.

SKU: SC-GT414 Categoría:

From $1,000

⚙
Personalización disponibleTodos los parámetros se pueden adaptar a sus requisitos de producción. El precio final se cotiza según sus especificaciones confirmadas.

Descripción general

La GT4-14 es una máquina enderezadora y cortadora de barras de refuerzo automática de alta eficiencia, que procesa barras redondas y barras corrugadas de 4-14mm. Controlada por PLC con servomotor para un corte de longitud preciso (precisión de ±1mm).

Características principales

  • Control PLC + servomotor para un corte de precisión
  • Alimentación continua, alta eficiencia 30-45 pcs/min
  • Conteo automático de longitud y configuración por lotes
  • Cuchillas de corte endurecidas, larga vida útil
  • Diseño compacto, fácil de reubicar en la obra
  • Funcionamiento con bajo nivel de ruido (menos de 75dB)

Aplicaciones

Procesamiento de barras de refuerzo en obra, fábricas de concreto prefabricado, centros de distribución de barras de refuerzo.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Máquina automática enderezadora y cortadora de barras corrugadas GT4-14”

Your email address will not be published. Required fields are marked *

Productos relacionados

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

What wire diameter range can these machines handle?

The range runs from small wire around 1.2 mm up to 25 mm rebar, depending on the model. Each machine has a stated straightening diameter range and cutting length range, both of which should be confirmed in writing before ordering.

How accurate is the cutting length?

Cutting length tolerance varies by model. Smaller machines are typically rated to about plus or minus 1 mm, while larger hub and hydraulic machines are commonly rated to within 5 mm. Straightening accuracy is usually stated separately, around 1 mm per metre.

Can it cut both round and threaded rebar?

Yes. Several models in the range are built for both round steel and threaded steel, and profile machines can also handle square, hexagonal and flat steel with the appropriate tooling. Confirm the material you need when specifying.

What is the difference between the hub type and the CNC hydraulic type?

Hub type machines use a rotating hub to straighten wire and are suited to a wide diameter range at moderate speed. CNC hydraulic machines use hydraulic cut-off with programmable length control, which suits repeat production runs and higher accuracy requirements.

How fast do they run?

Straightening speed is typically up to about 30 m/min on the larger machines, with small wire machines running faster. Actual output depends on cut length as much as line speed, since short cuts mean more cutting cycles per metre.

Can the machine be configured for our production line?

Yes. Cutting length range, motor power, voltage and control configuration can all be specified. Most machines in this range are built to order rather than supplied from stock.

Scroll al inicio