2.3 Ton Heavy Duty Disc Pay-off Rack

Portabobinas de disco para servicio pesado de 2.3 Ton

Desde $1,000

Portabobinas de disco para servicio pesado con capacidad de 2.3 ton para grandes bobinas de alambre.

Categoría:

From $1,000

⚙
Personalización disponibleTodos los parámetros pueden adaptarse a sus requisitos de producción. El precio final se cotiza de acuerdo con sus especificaciones confirmadas.

Descripción general

Un portabobinas de disco con capacidad de 2.3 toneladas para alimentar bobinas de alambre grandes y pesadas en líneas de trefilado o procesamiento. El diseño de disco soporta la bobina en toda su cara, evitando el colapso y el enredo de la bobina.

Características principales

  • Capacidad de carga de 2.3 toneladas
  • El soporte de disco evita el colapso de la bobina
  • Desbobinado suave sin enredos
  • Bastidor de acero de alta resistencia
  • Adecuado para bobinas grandes de alambrón

Especificaciones técnicas

Capacidad 2.3 ton
Tipo Portabobinas de disco
Aplicación Alimentación de bobinas grandes y pesadas de alambre

Envíenos su rango de diámetro de alambre, material y producción requerida — nuestros ingenieros confirmarán la especificación exacta y la cotización en 24 horas.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Portabobinas de disco para servicio pesado de 2.3 Ton”

Your email address will not be published. Required fields are marked *

Productos relacionados

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I match take-up capacity to my drawing machine?

Match it to the coil weight you actually handle. If the pay-off accepts 2.3 tons but the take-up fills at 800 kg, the line stops frequently. Line speed is also limited by the take-up, so an undersized take-up means the drawing machine never reaches its rated speed.

What is the difference between an I-wheel and an elephant trunk take-up?

An I-wheel take-up spools the finished wire onto a reel, which suits transport and storage. An elephant trunk take-up coils wire without a spool, which suits downstream processing where the coil is fed directly into another machine.

What spool sizes are available?

I-wheel take-up machines are available in 400, 630, 800 and 850 mm reel sizes, and vertical I-wheel units up to 1150 mm for large spools and heavy coils. The right size depends on the coil weight you need to handle.

Do I need equipment to move full spools?

Yes. A large vertical take-up produces a spool that needs handling equipment to move. If you do not have that equipment, a smaller I-wheel machine is the practical choice even where a larger one would be more efficient.

Can the take-up run continuously with the drawing machine?

It can, provided capacities are matched and the take-up speed follows the line speed. Tension control between the drawing machine and take-up matters, particularly on fine wire.

Is the take-up supplied with the drawing machine or separately?

Either. Take-up and pay-off equipment can be specified as part of a complete line or supplied separately to match a machine you already have. Give us the existing machine specification so the interface matches.

Scroll al inicio