Double Sided 5-wheel Unpowered Peeling Machine

Máquina peladora de doble cara de 5 ruedas sin motor

Desde $1,000

Máquina peladora de doble cara de 5 ruedas sin motor para la desincrustación de alambrón en línea.

Categoría:

From $1,000

⚙
Personalización disponibleTodos los parámetros se pueden adaptar a sus requisitos de producción. El precio final se cotiza de acuerdo con sus especificaciones confirmadas.

Descripción general

Una máquina peladora sin motor (accionada por la línea) con 5 ruedas a ambos lados del recorrido del alambre. Como toma su accionamiento del alambre en movimiento, no necesita un motor independiente y se puede integrar en una línea existente sin cableado.

Características principales

  • Sin motor — accionada por el propio alambre
  • De doble cara, 5 ruedas por lado
  • No se requiere un motor independiente
  • Fácil adaptación a líneas existentes
  • Bajo mantenimiento

Especificaciones técnicas

Tipo Máquina descascaradora sin motor de doble cara y 5 ruedas
Accionamiento Sin motor — accionada por la línea
Aplicación Desincrustación en línea de alambrón

Envíenos su rango de diámetros de alambre, material y producción requerida — nuestros ingenieros confirmarán la especificación exacta y cotizarán en 24 horas.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Máquina peladora de doble cara de 5 ruedas sin motor”

Your email address will not be published. Required fields are marked *

Productos relacionados

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

Why is descaling equipment needed before drawing?

Incoming hot rolled wire carries scale, and drawing that scale through a die wears the die bore unevenly and drags broken scale into the lubricant where it scratches the wire. Descaling ahead of the drawing machine is one of the most effective ways to extend die life.

What is the difference between peeling and descaling?

Peeling removes the surface layer mechanically with blades or wheels, taking off scale and surface defects together. Descaling generally refers to removing oxide scale, which can be done mechanically, by sand belt or by other means. Peeling removes more material but leaves a cleaner surface.

What is a pointing machine for?

A pointing machine forms a tapered point on the wire end so it can be threaded through the first drawing die. Without a point, the wire cannot be started through the die. Rotary and hydraulic pointing machines cover different diameter ranges.

Why is boronization coating necessary?

The carrier coating holds lubricant to the wire surface during drawing. Dry lubricant alone does not stay on the wire at the pressure and temperature inside a die, so the coating is what keeps the lubricant film intact.

Can these machines be added to an existing line?

Yes. Descaling, pointing and coating equipment can be supplied to match an existing drawing machine. Give us the wire diameter range and line speed so the auxiliary equipment is sized correctly.

How much floor space does the equipment need?

It depends on the machine and whether it is in-line or standalone. Dimensions are stated in the specification for each unit, and we can advise on layout once we know your line arrangement.

Scroll al inicio