LT-9/560 & LT-11/560 Water-tank Wire Drawing Machine

Máquina trefiladora con tanque de agua LT-9/560 & LT-11/560

Desde $1,000

Máquina trefiladora grande de tanque de agua con carrete bobinador de Φ560 mm.

Categoría:

From $1,000

⚙
Personalización disponibleTodos los parámetros se pueden adaptar a sus requisitos de producción. El precio final se cotiza según sus especificaciones confirmadas.

Resumen

Máquina trefiladora húmeda de carrete grande para alambre más grueso, disponible como LT-9/560 y LT-11/560. El carrete de bobinado de Φ560 mm admite bobinas de alambre más grandes, lo que reduce la frecuencia de cambios.

Características principales

  • Carrete de bobinado de Φ560 mm para bobinas grandes
  • LT-9/560: 75–90 kW; LT-11/560: 110–130 kW
  • Entrada Φ6.5–5.5 mm hasta Φ1.4 mm
  • Trefilado en húmedo para calidad superficial
  • Bastidor para trabajo pesado

Especificaciones técnicas

Modelo LT-9/560 LT-11/560
Diámetro máx. de entrada (mm) Φ6,5–5,5 Φ5,5
Diám. mín. de entrada (mm) Φ2,5–2,2 Φ1,4
Diám. del carrete bobinador (mm) Φ560 Φ560
Velocidad de trefilado (m/min) 280 250
Potencia del motor (kW) 75–90 110–130

Envíenos el rango de diámetros de alambre, el material y la producción requerida — nuestros ingenieros confirmarán la especificación exacta y la cotización en un plazo de 24 horas.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Máquina trefiladora con tanque de agua LT-9/560 & LT-11/560”

Your email address will not be published. Required fields are marked *

Productos relacionados

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I choose the right wire drawing machine?

It comes down to inlet diameter, finished diameter, material and target output. A machine is defined by what goes in and what comes out; the number of dies has to match the total reduction you need. Send us those four details and we will confirm which series fits.

Can the machine be built for our voltage?

Yes. Machines are configured for your site supply. Tell us the voltage, phase and frequency before production starts, because a machine built for 380 V / 50 Hz will not run on 440 V / 60 Hz without changing motors and drives.

What is the lead time and how is it shipped?

Lead time is counted from the date the deposit clears and the specification is confirmed. Machines are packed for sea freight using export-grade packing. Quotations are usually issued on FOB or CIF terms, and both are stated in writing.

Are drawing dies included?

Dies are consumable and are usually quoted separately. If a quotation mentions dies without stating how many or of what grade, ask before you compare prices, because die specification changes the cost significantly.

What spare parts are available and for how long?

We supply spare and wear parts for the machines we sell, generally for at least 5 years after the model is supplied. Quote the model and machine serial number when ordering so compatibility can be confirmed.

What does the warranty cover?

12 months from arrival at the destination port, covering manufacturing defects in materials and workmanship under normal operating conditions. Consumable parts such as dies, belts, bearings and seals are excluded.

Scroll al inicio