LT-9/560 & LT-11/560 Water-tank Wire Drawing Machine

LT-9/560 & LT-11/560 Mesin Tarik Kawat Tangki Air

Mulai $1,000

Mesin tarik kawat tangki air besar dengan gulungan penggulung Φ560 mm.

Kategori:

From $1,000

⚙
Dapat disesuaikanSemua parameter dapat disesuaikan dengan kebutuhan produksi Anda. Harga akhir dikutip sesuai spesifikasi yang Anda konfirmasi.

Ikhtisar

Mesin tarik kawat basah dengan gulungan besar untuk kawat yang lebih berat, tersedia sebagai LT-9/560 dan LT-11/560. Gulungan penggulung Φ560 mm menangani gulungan kawat yang lebih besar, sehingga mengurangi frekuensi pergantian.

Fitur Utama

  • Gulungan penggulung Φ560 mm untuk gulungan besar
  • LT-9/560: 75–90 kW; LT-11/560: 110–130 kW
  • Diameter masuk Φ6.5–5.5 mm turun hingga Φ1.4 mm
  • Penarikan basah untuk kualitas permukaan
  • Rangka tugas berat

Spesifikasi Teknis

Model LT-9/560 LT-11/560
Diameter masuk maks. (mm) Φ6.5–5.5 Φ5.5
Diameter masuk min. (mm) Φ2.5–2.2 Φ1.4
Diameter gulungan mesin penggulung kawat (mm) Φ560 Φ560
Kecepatan tarik (m/min) 280 250
Daya motor (kW) 75–90 110–130

Kirimkan kepada kami rentang diameter kawat, material, dan output yang dibutuhkan — teknisi kami akan mengonfirmasi spesifikasi yang tepat dan penawaran dalam 24 jam.

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “LT-9/560 & LT-11/560 Mesin Tarik Kawat Tangki Air”

Your email address will not be published. Required fields are marked *

Produk Terkait

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I choose the right wire drawing machine?

It comes down to inlet diameter, finished diameter, material and target output. A machine is defined by what goes in and what comes out; the number of dies has to match the total reduction you need. Send us those four details and we will confirm which series fits.

Can the machine be built for our voltage?

Yes. Machines are configured for your site supply. Tell us the voltage, phase and frequency before production starts, because a machine built for 380 V / 50 Hz will not run on 440 V / 60 Hz without changing motors and drives.

What is the lead time and how is it shipped?

Lead time is counted from the date the deposit clears and the specification is confirmed. Machines are packed for sea freight using export-grade packing. Quotations are usually issued on FOB or CIF terms, and both are stated in writing.

Are drawing dies included?

Dies are consumable and are usually quoted separately. If a quotation mentions dies without stating how many or of what grade, ask before you compare prices, because die specification changes the cost significantly.

What spare parts are available and for how long?

We supply spare and wear parts for the machines we sell, generally for at least 5 years after the model is supplied. Quote the model and machine serial number when ordering so compatibility can be confirmed.

What does the warranty cover?

12 months from arrival at the destination port, covering manufacturing defects in materials and workmanship under normal operating conditions. Consumable parts such as dies, belts, bearings and seals are excluded.

Scroll to Top