LT-13/450 & LT-9/450 Water-tank Wire Drawing Machine

Mesin Tarik Kawat Tangki Air LT-13/450 & LT-9/450

Mulai $1,000

Mesin tarik kawat tangki air berat untuk batang aluminium dan batang tembaga, Φ9.5 mm hingga Φ1.5 mm.

Kategori:

From $1,000

⚙
Dapat disesuaikanSemua parameter dapat disesuaikan dengan kebutuhan produksi Anda. Harga akhir dikutip sesuai spesifikasi yang telah Anda konfirmasi.

Ikhtisar

Dirancang untuk penarikan batang aluminium dan batang tembaga, dengan roda kecepatan konstan Φ450 mm dan penggerak 75–90 kW. Menghasilkan kawat konduktor untuk pembuatan kabel pada 500–750 m/min. Varian LT-9/450 menangani batang baja bebas oksigen.

Fitur Utama

  • Menangani batang aluminium, batang tembaga, dan batang baja bebas oksigen
  • Roda kecepatan konstan Φ450 mm
  • Motor utama 75–90 kW
  • Kecepatan tarik hingga 750 m/min
  • Penarikan basah untuk kualitas permukaan yang sangat baik

Spesifikasi Teknis

Model LT-13/450 LT-9/450
Bahan masuk Batang aluminium / batang tembaga Batang baja bebas oksigen
Diameter masuk maksimum Φ9.5, Φ8 mm Φ8 mm
Diameter keluar minimum Φ1.7, Φ1.5 mm Φ3.0 mm
Diameter roda kecepatan konstan. Φ450 mm Φ450 mm
Kecepatan tarik 500–750 m/min 300–450 m/min
Daya motor 75–90 kW 75–90 kW

Kirimkan kepada kami rentang diameter kawat, material, dan output yang dibutuhkan — insinyur kami akan mengonfirmasi spesifikasi persisnya dan memberikan penawaran dalam 24 jam.

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “Mesin Tarik Kawat Tangki Air LT-13/450 & LT-9/450”

Your email address will not be published. Required fields are marked *

Produk Terkait

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I choose the right wire drawing machine?

It comes down to inlet diameter, finished diameter, material and target output. A machine is defined by what goes in and what comes out; the number of dies has to match the total reduction you need. Send us those four details and we will confirm which series fits.

Can the machine be built for our voltage?

Yes. Machines are configured for your site supply. Tell us the voltage, phase and frequency before production starts, because a machine built for 380 V / 50 Hz will not run on 440 V / 60 Hz without changing motors and drives.

What is the lead time and how is it shipped?

Lead time is counted from the date the deposit clears and the specification is confirmed. Machines are packed for sea freight using export-grade packing. Quotations are usually issued on FOB or CIF terms, and both are stated in writing.

Are drawing dies included?

Dies are consumable and are usually quoted separately. If a quotation mentions dies without stating how many or of what grade, ask before you compare prices, because die specification changes the cost significantly.

What spare parts are available and for how long?

We supply spare and wear parts for the machines we sell, generally for at least 5 years after the model is supplied. Quote the model and machine serial number when ordering so compatibility can be confirmed.

What does the warranty cover?

12 months from arrival at the destination port, covering manufacturing defects in materials and workmanship under normal operating conditions. Consumable parts such as dies, belts, bearings and seals are excluded.

Scroll to Top