LT-13/450 & LT-9/450 Water-tank Wire Drawing Machine

Máquina trefiladora con tanque de agua LT-13/450 y LT-9/450

Desde $1,000

Máquina trefiladora pesada con tanque de agua para alambrón de aluminio y alambrón de cobre, de Φ9.5 mm a Φ1.5 mm.

Categoría:

From $1,000

⚙
Personalización disponibleTodos los parámetros se pueden adaptar a sus requisitos de producción. El precio final se cotiza según sus especificaciones confirmadas.

Descripción general

Diseñada para el trefilado de varilla de aluminio y varilla de cobre, con una rueda de velocidad constante de Φ450 mm y accionamiento de 75–90 kW. Produce alambre conductor para la fabricación de cables a 500–750 m/min. La variante LT-9/450 maneja varilla de acero libre de oxígeno.

Características principales

  • Maneja varilla de aluminio, varilla de cobre y varilla de acero libre de oxígeno
  • Rueda de velocidad constante de Φ450 mm
  • Motor principal de 75–90 kW
  • Velocidad de tracción de hasta 750 m/min
  • Trefilado en húmedo para una excelente calidad superficial

Especificaciones técnicas

Modelo LT-13/450 LT-9/450
Material de entrada Alambrón de aluminio / alambrón de cobre Alambrón de acero libre de oxígeno
Diámetro máximo de entrada Φ9.5, Φ8 mm Φ8 mm
Diámetro mínimo de salida Φ1.7, Φ1.5 mm Φ3.0 mm
Diámetro de la rueda de velocidad constante Φ450 mm Φ450 mm
Velocidad de tracción 500–750 m/min 300–450 m/min
Potencia del motor 75–90 kW 75–90 kW

Envíenos su rango de diámetro de alambre, material y producción requerida — nuestros ingenieros confirmarán la especificación exacta y cotizarán en un plazo de 24 horas.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Máquina trefiladora con tanque de agua LT-13/450 y LT-9/450”

Your email address will not be published. Required fields are marked *

Productos relacionados

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I choose the right wire drawing machine?

It comes down to inlet diameter, finished diameter, material and target output. A machine is defined by what goes in and what comes out; the number of dies has to match the total reduction you need. Send us those four details and we will confirm which series fits.

Can the machine be built for our voltage?

Yes. Machines are configured for your site supply. Tell us the voltage, phase and frequency before production starts, because a machine built for 380 V / 50 Hz will not run on 440 V / 60 Hz without changing motors and drives.

What is the lead time and how is it shipped?

Lead time is counted from the date the deposit clears and the specification is confirmed. Machines are packed for sea freight using export-grade packing. Quotations are usually issued on FOB or CIF terms, and both are stated in writing.

Are drawing dies included?

Dies are consumable and are usually quoted separately. If a quotation mentions dies without stating how many or of what grade, ask before you compare prices, because die specification changes the cost significantly.

What spare parts are available and for how long?

We supply spare and wear parts for the machines we sell, generally for at least 5 years after the model is supplied. Quote the model and machine serial number when ordering so compatibility can be confirmed.

What does the warranty cover?

12 months from arrival at the destination port, covering manufacturing defects in materials and workmanship under normal operating conditions. Consumable parts such as dies, belts, bearings and seals are excluded.

Scroll al inicio