LT-17/280 & LT-17/250 Fine Wire Drawing Machine

LT-17/280 & LT-17/250 Máquina trefiladora de alambre fino

Desde $1,000

Máquina trefiladora fina de 17 hileras para alambre hasta Φ0.45 mm, hasta 600 m/min.

Categoría:

From $1,000

⚙
Personalización disponibleTodos los parámetros se pueden adaptar a sus requisitos de producción. El precio final se cotiza según sus especificaciones confirmadas.

Descripción general

La serie LT-17 utiliza 17 hileras de trefilado para lograr una relación de compresión total del 92%, produciendo alambre fino desde una entrada de Φ2.5 mm hasta una salida de Φ0.45 mm. Ampliamente utilizada para la producción de alambre de soldadura, alambre conductor de cables y alambre para resortes.

Características principales

  • 17 hileras de trefilado — relación de compresión total 92%
  • Finura máxima de salida Φ0.45 mm
  • Velocidad de trefilado 500–600 m/min (modelo 280)
  • Control de frecuencia variable
  • Disposición compacta de carrete vertical

Especificaciones técnicas

Modelo LT-17/280 LT-17/250
Diámetro de carrete terminado / polea cónica Φ280 mm Φ250 mm
N.º de hileras de trefilado 17 pcs 17 pcs
Diámetro de entrada Φ2.5–2.0 mm Φ2.2–1.6 mm
Diámetro de salida Φ0.9–0.45 mm Φ0.55–0.45 mm
Relación de compresión total 92% 92%
Relación de compresión por pasada 14% ≤ 14%
Rango de velocidad de trefilado 500–600 m/min ≤ 550 m/min
Potencia del motor correspondiente 22–30 kW 15–18.5 kW

Envíenos su intervalo de diámetros de alambre, material y producción requerida — nuestros ingenieros confirmarán la especificación exacta y cotizarán en un plazo de 24 horas.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “LT-17/280 & LT-17/250 Máquina trefiladora de alambre fino”

Your email address will not be published. Required fields are marked *

Productos relacionados

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I choose the right wire drawing machine?

It comes down to inlet diameter, finished diameter, material and target output. A machine is defined by what goes in and what comes out; the number of dies has to match the total reduction you need. Send us those four details and we will confirm which series fits.

Can the machine be built for our voltage?

Yes. Machines are configured for your site supply. Tell us the voltage, phase and frequency before production starts, because a machine built for 380 V / 50 Hz will not run on 440 V / 60 Hz without changing motors and drives.

What is the lead time and how is it shipped?

Lead time is counted from the date the deposit clears and the specification is confirmed. Machines are packed for sea freight using export-grade packing. Quotations are usually issued on FOB or CIF terms, and both are stated in writing.

Are drawing dies included?

Dies are consumable and are usually quoted separately. If a quotation mentions dies without stating how many or of what grade, ask before you compare prices, because die specification changes the cost significantly.

What spare parts are available and for how long?

We supply spare and wear parts for the machines we sell, generally for at least 5 years after the model is supplied. Quote the model and machine serial number when ordering so compatibility can be confirmed.

What does the warranty cover?

12 months from arrival at the destination port, covering manufacturing defects in materials and workmanship under normal operating conditions. Consumable parts such as dies, belts, bearings and seals are excluded.

Scroll al inicio