F-100 Pointing and Pulling Machine

Máquina de punzonar y tracción F-100

Desde $1,000

Máquina de punzonar y tirar para alambre de aluminio, cobre y acero con bajo contenido de carbono.

Categoría:

From $1,000

⚙
Personalización disponibleTodos los parámetros se pueden adaptar a sus requisitos de producción. El precio final se cotiza de acuerdo con sus especificaciones confirmadas.

Descripción general

La F-100 combina el punzonado con la tracción, produciendo un extremo punzonado y luego trefilando el alambre en una sola configuración. Maneja aluminio de hasta 9,5 mm, cobre de hasta 8,0 mm y acero de bajo carbono de hasta 6,5 mm, con puntas mínimas de hasta 2,0 mm.

Características principales

  • Punzonado y tracción combinados
  • Aluminio de hasta Φ9,5 mm
  • Cobre hasta Φ8.0 mm
  • Acero de bajo carbono hasta Φ6.5 mm
  • Diámetro mínimo de punta 2.0 mm

Especificaciones técnicas

Modelo F-100
Diámetro máximo de punta 9.5 mm (aluminio) / 8.0 mm (cobre) / 6.5 mm (acero de bajo carbono)
Diámetro mínimo de punta 2.0 mm
Aplicación Punzonado y tracción de los extremos del alambre

Envíenos el rango de diámetro de alambre, el material y la producción requerida — nuestros ingenieros confirmarán la especificación exacta y la cotización en un plazo de 24 horas.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Máquina de punzonar y tracción F-100”

Your email address will not be published. Required fields are marked *

Productos relacionados

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

Can you build a machine to our own specification?

Yes. Most machines in this range are built to order, and parameters such as diameter range, motor power, voltage, control configuration and tooling can be tailored. Send us the process you need to run and we will confirm what is feasible.

What information do you need to quote a custom machine?

The material, the inlet size, the finished size, the target output and the voltage at your site. For a complete line, also tell us the layout constraints and what equipment you already have.

How long does a custom build take?

Lead time depends on the machine and is counted from the date the deposit clears and the specification is confirmed. It is stated in the quotation rather than assumed.

Can you match an existing machine from another supplier?

In many cases yes. Send the specification or drawings of the existing machine and we will tell you what can be matched and where a change is needed.

Are drawings supplied before production?

For custom builds, specification and drawings are confirmed in writing before production starts. Those confirmed documents take precedence over general catalogue descriptions.

What if the machine does not match the confirmed specification on arrival?

Contact us within 7 days of delivery with photos and a description. Where the discrepancy is confirmed to be our responsibility, we arrange supply of the missing or incorrect part, repair, replacement or a partial refund.

Scroll al inicio