SDJ Acid Free Sand Belt Rust Removal Machine

Machine de dérouillage à bande abrasive sans acide SDJ

À partir de $1,000

Machine de dérouillage à bande abrasive sans acide pour le nettoyage de surface du fil machine.

Catégorie :

From $1,000

⚙
Personnalisation disponibleTous les paramètres peuvent être adaptés à vos exigences de production. Le prix final est établi selon vos spécifications confirmées.

Vue d’ensemble

Élimine la rouille et l’oxyde de surface du fil machine à l’aide de bandes abrasives plutôt que par décapage acide. Cela évite l’élimination des déchets acides et offre une étape de préparation plus propre et plus respectueuse de l’environnement avant le tréfilage.

Caractéristiques principales

  • Procédé sans acide — aucun déchet de décapage
  • La bande abrasive élimine la rouille et la calamine
  • Empreinte environnementale plus propre
  • Adapté à la préparation du fil machine
  • S’intègre aux lignes de tréfilage

Spécifications techniques

Modèle SDJ
Méthode Dérouillage par bande abrasive
Avantage Sans acide — aucun effluent de décapage
Application Préparation de surface du fil machine

Envoyez-nous votre plage de diamètres de fil, matériau et débit requis — nos ingénieurs confirmeront la spécification exacte et le devis sous 24 heures.

Avis

Il n’y a pas encore d’avis.

Soyez le premier à laisser votre avis sur “Machine de dérouillage à bande abrasive sans acide SDJ”

Your email address will not be published. Required fields are marked *

Produits similaires

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

Why is descaling equipment needed before drawing?

Incoming hot rolled wire carries scale, and drawing that scale through a die wears the die bore unevenly and drags broken scale into the lubricant where it scratches the wire. Descaling ahead of the drawing machine is one of the most effective ways to extend die life.

What is the difference between peeling and descaling?

Peeling removes the surface layer mechanically with blades or wheels, taking off scale and surface defects together. Descaling generally refers to removing oxide scale, which can be done mechanically, by sand belt or by other means. Peeling removes more material but leaves a cleaner surface.

What is a pointing machine for?

A pointing machine forms a tapered point on the wire end so it can be threaded through the first drawing die. Without a point, the wire cannot be started through the die. Rotary and hydraulic pointing machines cover different diameter ranges.

Why is boronization coating necessary?

The carrier coating holds lubricant to the wire surface during drawing. Dry lubricant alone does not stay on the wire at the pressure and temperature inside a die, so the coating is what keeps the lubricant film intact.

Can these machines be added to an existing line?

Yes. Descaling, pointing and coating equipment can be supplied to match an existing drawing machine. Give us the wire diameter range and line speed so the auxiliary equipment is sized correctly.

How much floor space does the equipment need?

It depends on the machine and whether it is in-line or standalone. Dimensions are stated in the specification for each unit, and we can advise on layout once we know your line arrangement.

Défiler vers le haut