GW-50 Mesin Pembengkok Besi Beton CNC

GW-50 Mesin Pembengkok Besi Beton CNC

Mulai $1,000

Mesin pembengkok baja tulangan CNC 6-50mm, dapat diprogram, dapat menyimpan 100 program, penjepit hidrolik.

SKU: BM-GW50CNC Kategori:

From $1,000

⚙
Dapat disesuaikanSemua parameter dapat disesuaikan dengan kebutuhan produksi Anda. Harga akhir dikutip sesuai spesifikasi yang Anda konfirmasi.

Ikhtisar

GW-50 CNC adalah mesin pembengkok tulangan yang dikendalikan komputer untuk pembengkokan presisi tinggi tulangan 6-50mm. Sudut dan jumlah dapat diprogram untuk produksi batch bentuk kompleks.

Fitur Utama

  • Kontrol CNC dengan layar sentuh berwarna
  • Menyimpan hingga 100 program pembengkokan
  • Deteksi dan koreksi sudut otomatis
  • Penjepitan hidraulik untuk besi beton berat
  • Kemampuan penekukan maju/mundur
  • Penghitung produksi dan manajemen batch
  • Dukungan diagnostik jarak jauh

Aplikasi

Produksi beton pracetak, konstruksi jembatan dan jalan raya, proyek infrastruktur skala besar, pusat pemrosesan besi beton.

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “GW-50 Mesin Pembengkok Besi Beton CNC”

Your email address will not be published. Required fields are marked *

Produk Terkait

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

What rebar diameter can these bending machines handle?

The range covers construction steel from about 6 mm up to 50 mm, depending on the model. Each machine has a stated maximum bending diameter that should be confirmed against the steel you actually use.

What is the difference between manual and CNC bending machines?

Manual machines use mechanical stops and are set up by hand for each bend angle. CNC machines store bend programs and run repeat sequences, which suits production work where the same shapes are bent repeatedly.

How many bends can be programmed?

Programmable bend count and angle storage depend on the CNC model and control system. Confirm the specification for the model you are considering against the shapes you need to produce.

Can it bend both directions?

Bending direction capability depends on the machine design. Confirm whether the model you are considering supports forward and reverse bending for the shapes you need.

What is the bending accuracy?

Bending angle accuracy depends on the control system and the material being bent. Steel grade and diameter both affect springback, so the program may need adjustment for different material.

Does it include bending pins and tooling?

Tooling supply varies by model and should be confirmed in the quotation. Bending pins, centre pins and dies are the parts most often quoted separately.

Scroll to Top