LZ-6/560+4/400 Straight Line Wire Drawing Unit

Unit Tarik Kawat Lurus LZ-6/560+4/400

Mulai $1,000

Unit mesin tarik kawat jalur lurus gabungan dengan bagian 6-blok 560 mm dan 4-blok 400 mm.

Kategori:

From $1,000

⚙
Dapat disesuaikanSemua parameter dapat disesuaikan dengan kebutuhan produksi Anda. Harga akhir dikutip sesuai spesifikasi yang telah Anda konfirmasi.

Ikhtisar

Unit tarik gabungan yang memadukan bagian 6-blok 560 mm dengan bagian 4-blok 400 mm, memungkinkan reduksi total besar dalam satu lini kontinu. Penggunaan umum: dari kawat baja karbon rendah/menengah 6.5 mm hingga kawat jadi 1.8 mm pada kecepatan hingga 900 m/min.

Fitur Utama

  • Konfigurasi gabungan 6+4 blok untuk reduksi total besar
  • Kecepatan lini maks. hingga 900 m/min
  • 10 × 30 kW motor YVFZ-4P
  • Opsi penggulung kawat belalai gajah atau roda-I
  • Cocok untuk kawat baja karbon rendah dan sedang

Spesifikasi Teknis

Diameter masuk ≤ Φ6.5 mm
Diameter keluar Φ1.8 mm
Menyesuaikan dengan bahan penarikan Kawat baja karbon rendah dan sedang
Kecepatan lini maksimum < 900 m/min
Motor listrik YVFZ-4P / 30 kW × 10 unit
Perangkat penggulung produk jadi XB-600 tipe belalai gajah / WS-800 tipe berbentuk I

Kirimkan kepada kami rentang diameter kawat, material, dan keluaran yang dibutuhkan — teknisi kami akan mengonfirmasi spesifikasi tepat dan memberikan penawaran dalam 24 jam.

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “Unit Tarik Kawat Lurus LZ-6/560+4/400”

Your email address will not be published. Required fields are marked *

Produk Terkait

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I choose the right wire drawing machine?

It comes down to inlet diameter, finished diameter, material and target output. A machine is defined by what goes in and what comes out; the number of dies has to match the total reduction you need. Send us those four details and we will confirm which series fits.

Can the machine be built for our voltage?

Yes. Machines are configured for your site supply. Tell us the voltage, phase and frequency before production starts, because a machine built for 380 V / 50 Hz will not run on 440 V / 60 Hz without changing motors and drives.

What is the lead time and how is it shipped?

Lead time is counted from the date the deposit clears and the specification is confirmed. Machines are packed for sea freight using export-grade packing. Quotations are usually issued on FOB or CIF terms, and both are stated in writing.

Are drawing dies included?

Dies are consumable and are usually quoted separately. If a quotation mentions dies without stating how many or of what grade, ask before you compare prices, because die specification changes the cost significantly.

What spare parts are available and for how long?

We supply spare and wear parts for the machines we sell, generally for at least 5 years after the model is supplied. Quote the model and machine serial number when ordering so compatibility can be confirmed.

What does the warranty cover?

12 months from arrival at the destination port, covering manufacturing defects in materials and workmanship under normal operating conditions. Consumable parts such as dies, belts, bearings and seals are excluded.

Scroll to Top