LT9/200, LT11/200, LT11/250 Water-tank Wire Drawing Machine

LT9/200, LT11/200, LT11/250 Water-tank Wire Drawing Machine

From $1,000

Compact water-tank wire drawing machine for super-fine wire down to Φ0.25 mm.

Category:

From $1,000

⚙
Customization availableAll parameters can be tailored to your production requirements. The final price is quoted according to your confirmed specifications.

Overview

Water-tank (wet) drawing machines draw wire fully submerged in lubricant, which gives superior surface finish and die life for very fine wire. This compact model produces wire down to Φ0.25 mm and is commonly used for cable conductor and fine hardware wire.

Key Features

  • Wet drawing — wire fully immersed in lubricant
  • Outlet down to Φ0.25 mm
  • 9–11 dies
  • Variable frequency stepless speed regulation
  • Very compact: 1250 × 800 × 1000 mm

Technical Specifications

Vertical reel diameter Φ200–250 mm
No. of dies 9–11
Inlet diameter Φ1.2–Φ0.7 mm
Min. outlet diameter Φ0.45–Φ0.25 mm
Tensile strength of inlet material ≤ 780 N/mm²
Path compression ratio ≤ 17%
Drawing speed range 80–250 m/min
Supporting motor power 4–5.5 kW
Control method Variable frequency, infinite speed regulation
Collection method I-shaped wheel, vertical scroll
External dimensions 1250 × 800 × 1000 mm
Whole machine weight 750 kg

Send us your wire diameter range, material and required output — our engineers will confirm the exact specification and quote within 24 hours.

Reviews

There are no reviews yet.

Be the first to review “LT9/200, LT11/200, LT11/250 Water-tank Wire Drawing Machine”

Your email address will not be published. Required fields are marked *

Related products

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I choose the right wire drawing machine?

It comes down to inlet diameter, finished diameter, material and target output. A machine is defined by what goes in and what comes out; the number of dies has to match the total reduction you need. Send us those four details and we will confirm which series fits.

Can the machine be built for our voltage?

Yes. Machines are configured for your site supply. Tell us the voltage, phase and frequency before production starts, because a machine built for 380 V / 50 Hz will not run on 440 V / 60 Hz without changing motors and drives.

What is the lead time and how is it shipped?

Lead time is counted from the date the deposit clears and the specification is confirmed. Machines are packed for sea freight using export-grade packing. Quotations are usually issued on FOB or CIF terms, and both are stated in writing.

Are drawing dies included?

Dies are consumable and are usually quoted separately. If a quotation mentions dies without stating how many or of what grade, ask before you compare prices, because die specification changes the cost significantly.

What spare parts are available and for how long?

We supply spare and wear parts for the machines we sell, generally for at least 5 years after the model is supplied. Quote the model and machine serial number when ordering so compatibility can be confirmed.

What does the warranty cover?

12 months from arrival at the destination port, covering manufacturing defects in materials and workmanship under normal operating conditions. Consumable parts such as dies, belts, bearings and seals are excluded.

Scroll to Top