Rotary Wire Pointing Machine
Rotary Wire Pointing Machine

Rotary Wire Pointing Machine

From $1,000

Rotary pointing machine — rolls a tapered point on wire ends for die threading.

Category:

From $1,000

⚙
Customization availableAll parameters can be tailored to your production requirements. The final price is quoted according to your confirmed specifications.

Overview

The pointing machine rolls a tapered point onto the end of wire or rod so that it can be threaded through the first drawing die. The rotary type uses grooved rolls rather than grinding wheels, giving a strong, consistent point without metal loss from abrasive dust.

Key Features

  • Rotary roll design — forms a point without grinding
  • Strong, consistent pointed ends
  • No abrasive dust or wheel wear
  • Handles a range of wire diameters
  • Fast cycle time

Technical Specifications

Type Rotary wire pointing machine
Method Roll forming of tapered point
Application Wire end preparation for drawing
Wire range Model dependent — specify diameter

Send us your wire diameter range, material and required output — our engineers will confirm the exact specification and quote within 24 hours.

Reviews

There are no reviews yet.

Be the first to review “Rotary Wire Pointing Machine”

Your email address will not be published. Required fields are marked *

Related products

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

Why is descaling equipment needed before drawing?

Incoming hot rolled wire carries scale, and drawing that scale through a die wears the die bore unevenly and drags broken scale into the lubricant where it scratches the wire. Descaling ahead of the drawing machine is one of the most effective ways to extend die life.

What is the difference between peeling and descaling?

Peeling removes the surface layer mechanically with blades or wheels, taking off scale and surface defects together. Descaling generally refers to removing oxide scale, which can be done mechanically, by sand belt or by other means. Peeling removes more material but leaves a cleaner surface.

What is a pointing machine for?

A pointing machine forms a tapered point on the wire end so it can be threaded through the first drawing die. Without a point, the wire cannot be started through the die. Rotary and hydraulic pointing machines cover different diameter ranges.

Why is boronization coating necessary?

The carrier coating holds lubricant to the wire surface during drawing. Dry lubricant alone does not stay on the wire at the pressure and temperature inside a die, so the coating is what keeps the lubricant film intact.

Can these machines be added to an existing line?

Yes. Descaling, pointing and coating equipment can be supplied to match an existing drawing machine. Give us the wire diameter range and line speed so the auxiliary equipment is sized correctly.

How much floor space does the equipment need?

It depends on the machine and whether it is in-line or standalone. Dimensions are stated in the specification for each unit, and we can advise on layout once we know your line arrangement.

Scroll to Top