Rotary Wire Pointing Machine

Mesin Penajam Ujung Kawat Putar

Mulai $1,000

Mesin penajam ujung kawat putar — membentuk ujung tirus dengan rol pada ujung kawat untuk pemasukan ke die (cetakan tarik).

Kategori:

From $1,000

⚙
Dapat disesuaikanSemua parameter dapat disesuaikan dengan kebutuhan produksi Anda. Harga akhir dikutip sesuai spesifikasi yang Anda konfirmasi.

Ringkasan

Mesin penajam ujung kawat menggulung ujung meruncing pada ujung kawat atau batang agar dapat dimasukkan melalui die tarik pertama. Tipe putar menggunakan gulungan beralur, bukan roda gerinda, sehingga menghasilkan ujung yang kuat dan konsisten tanpa kehilangan logam akibat debu abrasif.

Fitur Utama

  • Desain gulungan putar — membentuk ujung meruncing tanpa penggerindaan
  • Ujung meruncing yang kuat dan konsisten
  • Tanpa debu abrasif atau keausan roda
  • Menangani berbagai diameter kawat
  • Waktu siklus cepat

Spesifikasi Teknis

Tipe Mesin penajam ujung kawat putar
Metode Pembentukan rol untuk ujung tirus
Aplikasi Persiapan ujung kawat untuk penarikan
Rentang kawat Tergantung model — tentukan diameter

Kirimkan kepada kami rentang diameter kawat, material, dan keluaran yang dibutuhkan — insinyur kami akan mengonfirmasi spesifikasi tepat dan memberikan penawaran dalam 24 jam.

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “Mesin Penajam Ujung Kawat Putar”

Your email address will not be published. Required fields are marked *

Produk Terkait

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

Why is descaling equipment needed before drawing?

Incoming hot rolled wire carries scale, and drawing that scale through a die wears the die bore unevenly and drags broken scale into the lubricant where it scratches the wire. Descaling ahead of the drawing machine is one of the most effective ways to extend die life.

What is the difference between peeling and descaling?

Peeling removes the surface layer mechanically with blades or wheels, taking off scale and surface defects together. Descaling generally refers to removing oxide scale, which can be done mechanically, by sand belt or by other means. Peeling removes more material but leaves a cleaner surface.

What is a pointing machine for?

A pointing machine forms a tapered point on the wire end so it can be threaded through the first drawing die. Without a point, the wire cannot be started through the die. Rotary and hydraulic pointing machines cover different diameter ranges.

Why is boronization coating necessary?

The carrier coating holds lubricant to the wire surface during drawing. Dry lubricant alone does not stay on the wire at the pressure and temperature inside a die, so the coating is what keeps the lubricant film intact.

Can these machines be added to an existing line?

Yes. Descaling, pointing and coating equipment can be supplied to match an existing drawing machine. Give us the wire diameter range and line speed so the auxiliary equipment is sized correctly.

How much floor space does the equipment need?

It depends on the machine and whether it is in-line or standalone. Dimensions are stated in the specification for each unit, and we can advise on layout once we know your line arrangement.

Scroll to Top