HBK10-25 Automatic Traction Sheller (Descaling) Machine

HBK10-25 Mesin Pengupas Traksi Otomatis (Penghilangan Kerak)

Mulai $1,000

Mesin penghilangan kerak tarik otomatis untuk kawat batang Ø8–25 mm pada 20–80 m/min.

Kategori:

From $1,000

⚙
Dapat disesuaikanSemua parameter dapat disesuaikan dengan kebutuhan produksi Anda. Harga akhir dikutip sesuai spesifikasi yang Anda konfirmasi.

Ringkasan

HBK10-25 menghilangkan kerak dari kawat batangan sebelum penarikan, menggunakan traksi otomatis untuk menarik batang kawat melalui kepala penghilang kerak. Menangani batang kawat Ø8–25 mm pada kecepatan lini 20–80 m/min, dengan kecepatan traksi mandiri hingga 12.8 m/min. Spesifikasi lengkap mencakup motor, kotak reduksi, dan silinder pneumatik.

Fitur Utama

  • Traksi otomatis — tanpa penarikan manual
  • Menangani kawat batangan Ø8–25 mm
  • Kecepatan lini yang berlaku 20–80 m/min
  • Kecepatan tarik mandiri ≤ 12.8 m/min
  • Roda pembengkok dengan 2 × 1.5 kW motor sekrup penggerak
  • Memerlukan udara terkompresi 0.2 m³/min pada 0.8 MPa

Spesifikasi Teknis

Rentang spesifikasi bahan baku Ø8–25 mm
Rentang kecepatan yang berlaku 20–80 m/min
Kecepatan traksi mandiri ≤ 12,8 m/min
Motor pendukung (motor traksi) YE2-100L1-4 / 2,2 kW
Kotak reduksi (kotak reduksi traksi) R77D100M4-52.09
Motor ulir penggerak roda pembengkok (2 set) YE2-90L-4 / 1,5 kW
Kotak reduksi (2 set kotak reduksi sekrup pengarah) XLY3-59-(1.5) kW
Silinder roda pengumpan kawat (2 buah) SC160 × 100
Udara tekan disuplai oleh pengguna 0.2 m³/min, tekanan udara 0.8 MPa
Kesesuaian catu daya 380V/50Hz, sistem 3 fase 4 kawat

Kirimkan kepada kami rentang diameter kawat, material, dan output yang dibutuhkan Anda — insinyur kami akan mengonfirmasi spesifikasi yang tepat dan penawaran dalam 24 jam.

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “HBK10-25 Mesin Pengupas Traksi Otomatis (Penghilangan Kerak)”

Your email address will not be published. Required fields are marked *

Produk Terkait

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

Why is descaling equipment needed before drawing?

Incoming hot rolled wire carries scale, and drawing that scale through a die wears the die bore unevenly and drags broken scale into the lubricant where it scratches the wire. Descaling ahead of the drawing machine is one of the most effective ways to extend die life.

What is the difference between peeling and descaling?

Peeling removes the surface layer mechanically with blades or wheels, taking off scale and surface defects together. Descaling generally refers to removing oxide scale, which can be done mechanically, by sand belt or by other means. Peeling removes more material but leaves a cleaner surface.

What is a pointing machine for?

A pointing machine forms a tapered point on the wire end so it can be threaded through the first drawing die. Without a point, the wire cannot be started through the die. Rotary and hydraulic pointing machines cover different diameter ranges.

Why is boronization coating necessary?

The carrier coating holds lubricant to the wire surface during drawing. Dry lubricant alone does not stay on the wire at the pressure and temperature inside a die, so the coating is what keeps the lubricant film intact.

Can these machines be added to an existing line?

Yes. Descaling, pointing and coating equipment can be supplied to match an existing drawing machine. Give us the wire diameter range and line speed so the auxiliary equipment is sized correctly.

How much floor space does the equipment need?

It depends on the machine and whether it is in-line or standalone. Dimensions are stated in the specification for each unit, and we can advise on layout once we know your line arrangement.

Scroll to Top