Boronization Drying Production Line

Lini Produksi Pengeringan Boronisasi

Mulai $1,000

Lini pelapisan dan pengeringan boronisasi untuk perlakuan permukaan batang kawat sebelum penarikan.

Kategori:

From $1,000

⚙
Dapat disesuaikanSemua parameter dapat disesuaikan dengan kebutuhan produksi Anda. Harga akhir dikutip sesuai spesifikasi yang Anda konfirmasi.

Ikhtisar

Sebelum penarikan, kawat batang dilapisi dengan film pembawa berbasis boron yang meningkatkan daya rekat pelumas dan memperpanjang umur die (cetakan tarik). Lini produksi ini mengaplikasikan dan mengeringkan lapisan dalam satu lintasan kontinu, dan merupakan bagian penting dari pabrik penarikan kawat lengkap.

Fitur Utama

  • Pelapisan dan pengeringan boronisasi kontinu
  • Meningkatkan daya rekat pelumas dan umur die (cetakan tarik)
  • Terintegrasi dengan lini tarik kawat
  • Kapasitas kustom tersedia
  • Lengkap dengan bagian pemanasan dan pengeringan

Spesifikasi Teknis

Tipe Lini produksi pengeringan boronisasi
Proses Pelapisan + pengeringan kawat batangan
Kapasitas Dapat disesuaikan — tentukan kecepatan lini dan rentang kawat

Kirimkan kepada kami rentang diameter kawat, bahan, dan keluaran yang dibutuhkan — insinyur kami akan mengonfirmasi spesifikasi yang tepat dan penawaran dalam 24 jam.

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “Lini Produksi Pengeringan Boronisasi”

Your email address will not be published. Required fields are marked *

Produk Terkait

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

Why is descaling equipment needed before drawing?

Incoming hot rolled wire carries scale, and drawing that scale through a die wears the die bore unevenly and drags broken scale into the lubricant where it scratches the wire. Descaling ahead of the drawing machine is one of the most effective ways to extend die life.

What is the difference between peeling and descaling?

Peeling removes the surface layer mechanically with blades or wheels, taking off scale and surface defects together. Descaling generally refers to removing oxide scale, which can be done mechanically, by sand belt or by other means. Peeling removes more material but leaves a cleaner surface.

What is a pointing machine for?

A pointing machine forms a tapered point on the wire end so it can be threaded through the first drawing die. Without a point, the wire cannot be started through the die. Rotary and hydraulic pointing machines cover different diameter ranges.

Why is boronization coating necessary?

The carrier coating holds lubricant to the wire surface during drawing. Dry lubricant alone does not stay on the wire at the pressure and temperature inside a die, so the coating is what keeps the lubricant film intact.

Can these machines be added to an existing line?

Yes. Descaling, pointing and coating equipment can be supplied to match an existing drawing machine. Give us the wire diameter range and line speed so the auxiliary equipment is sized correctly.

How much floor space does the equipment need?

It depends on the machine and whether it is in-line or standalone. Dimensions are stated in the specification for each unit, and we can advise on layout once we know your line arrangement.

Scroll to Top