LT-17/280 & LT-17/250 Fine Wire Drawing Machine

LT-17/280 & LT-17/250 Mesin Tarik Kawat Halus

Mulai $1,000

Mesin tarik kawat halus 17-die untuk kawat hingga Φ0.45 mm, hingga 600 m/min.

Kategori:

From $1,000

⚙
Dapat disesuaikanSemua parameter dapat disesuaikan dengan kebutuhan produksi Anda. Harga akhir dikutip sesuai spesifikasi yang Anda konfirmasi.

Ikhtisar

Seri LT-17 menggunakan 17 die tarik untuk mencapai rasio kompresi total 92%, menghasilkan kawat halus dari diameter masuk Φ2.5 mm hingga diameter keluar Φ0.45 mm. Banyak digunakan untuk produksi kawat las, kawat konduktor kabel, dan kawat pegas.

Fitur Utama

  • 17 die tarik — rasio kompresi total 92%
  • Kehalusan keluar maks. Φ0.45 mm
  • Kecepatan tarik 500–600 m/min (model 280)
  • Kontrol frekuensi variabel
  • Tata letak gulungan vertikal kompak

Spesifikasi Teknis

Model LT-17/280 LT-17/250
Diameter gulungan jadi / katrol kerucut Φ280 mm Φ250 mm
Jumlah die tarik 17 pcs 17 pcs
Diameter masuk Φ2.5–2.0 mm Φ2.2–1.6 mm
Diameter keluar Φ0.9–0.45 mm Φ0.55–0.45 mm
Rasio kompresi total 92% 92%
Rasio kompresi pass 14% ≤ 14%
Rentang kecepatan tarik 500–600 m/min ≤ 550 m/min
Daya motor yang cocok 22–30 kW 15–18.5 kW

Kirimkan kepada kami rentang diameter kawat, material, dan output yang dibutuhkan — insinyur kami akan mengonfirmasi spesifikasi pasti dan memberikan penawaran dalam 24 jam.

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “LT-17/280 & LT-17/250 Mesin Tarik Kawat Halus”

Your email address will not be published. Required fields are marked *

Produk Terkait

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I choose the right wire drawing machine?

It comes down to inlet diameter, finished diameter, material and target output. A machine is defined by what goes in and what comes out; the number of dies has to match the total reduction you need. Send us those four details and we will confirm which series fits.

Can the machine be built for our voltage?

Yes. Machines are configured for your site supply. Tell us the voltage, phase and frequency before production starts, because a machine built for 380 V / 50 Hz will not run on 440 V / 60 Hz without changing motors and drives.

What is the lead time and how is it shipped?

Lead time is counted from the date the deposit clears and the specification is confirmed. Machines are packed for sea freight using export-grade packing. Quotations are usually issued on FOB or CIF terms, and both are stated in writing.

Are drawing dies included?

Dies are consumable and are usually quoted separately. If a quotation mentions dies without stating how many or of what grade, ask before you compare prices, because die specification changes the cost significantly.

What spare parts are available and for how long?

We supply spare and wear parts for the machines we sell, generally for at least 5 years after the model is supplied. Quote the model and machine serial number when ordering so compatibility can be confirmed.

What does the warranty cover?

12 months from arrival at the destination port, covering manufacturing defects in materials and workmanship under normal operating conditions. Consumable parts such as dies, belts, bearings and seals are excluded.

Scroll to Top