LT9/200, LT11/200, LT11/250 Water-tank Wire Drawing Machine

LT9/200, LT11/200, LT11/250 Mesin Tarik Kawat Bak Air

Mulai $1,000

Mesin tarik kawat tangki air kompak untuk kawat super halus hingga Φ0.25 mm.

Kategori:

From $1,000

⚙
Dapat disesuaikanSemua parameter dapat disesuaikan dengan kebutuhan produksi Anda. Harga akhir dikutip sesuai spesifikasi yang telah Anda konfirmasi.

Ikhtisar

Mesin tarik kawat tangki air (basah) menarik kawat yang terendam sepenuhnya dalam pelumas, sehingga memberikan hasil akhir permukaan dan umur die yang lebih unggul untuk kawat sangat halus. Model kompak ini menghasilkan kawat hingga Φ0.25 mm dan umumnya digunakan untuk konduktor kabel dan kawat perangkat keras halus.

Fitur Utama

  • Penarikan basah — kawat terendam sepenuhnya dalam pelumas
  • Diameter keluar hingga Φ0.25 mm
  • 9–11 die (cetakan tarik)
  • Pengaturan kecepatan tanpa tingkat dengan frekuensi variabel
  • Sangat ringkas: 1250 × 800 × 1000 mm

Spesifikasi Teknis

Diameter gulungan vertikal Φ200–250 mm
Jumlah die (cetakan tarik) 9–11
Diameter masuk Φ1.2–Φ0.7 mm
Diameter keluar minimum Φ0.45–Φ0.25 mm
Kekuatan tarik material masuk ≤ 780 N/mm²
Rasio kompresi lintasan ≤ 17%
Rentang kecepatan tarik 80–250 m/min
Daya motor pendukung 4–5.5 kW
Metode kontrol Frekuensi variabel, pengaturan kecepatan tak terbatas
Metode pengumpulan Roda berbentuk I, gulungan vertikal
Dimensi eksternal 1250 × 800 × 1000 mm
Berat seluruh mesin 750 kg

Kirimkan kepada kami rentang diameter kawat, bahan, dan keluaran yang dibutuhkan — insinyur kami akan mengonfirmasi spesifikasi persisnya dan memberikan penawaran dalam 24 jam.

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “LT9/200, LT11/200, LT11/250 Mesin Tarik Kawat Bak Air”

Your email address will not be published. Required fields are marked *

Produk Terkait

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I choose the right wire drawing machine?

It comes down to inlet diameter, finished diameter, material and target output. A machine is defined by what goes in and what comes out; the number of dies has to match the total reduction you need. Send us those four details and we will confirm which series fits.

Can the machine be built for our voltage?

Yes. Machines are configured for your site supply. Tell us the voltage, phase and frequency before production starts, because a machine built for 380 V / 50 Hz will not run on 440 V / 60 Hz without changing motors and drives.

What is the lead time and how is it shipped?

Lead time is counted from the date the deposit clears and the specification is confirmed. Machines are packed for sea freight using export-grade packing. Quotations are usually issued on FOB or CIF terms, and both are stated in writing.

Are drawing dies included?

Dies are consumable and are usually quoted separately. If a quotation mentions dies without stating how many or of what grade, ask before you compare prices, because die specification changes the cost significantly.

What spare parts are available and for how long?

We supply spare and wear parts for the machines we sell, generally for at least 5 years after the model is supplied. Quote the model and machine serial number when ordering so compatibility can be confirmed.

What does the warranty cover?

12 months from arrival at the destination port, covering manufacturing defects in materials and workmanship under normal operating conditions. Consumable parts such as dies, belts, bearings and seals are excluded.

Scroll to Top