SD-Z-300/36 Galvanized Wire Reeling Machine

Máquina bobinadora de alambre galvanizado SD-Z-300/36

Desde $1,000

Máquina bobinadora multibobina para alambre galvanizado que maneja 24–40 carretes a 45–75 m/min.

Categoría:

From $1,000

⚙
Personalización disponibleTodos los parámetros se pueden adaptar a sus requisitos de producción. El precio final se cotiza según sus especificaciones confirmadas.

Descripción general

Diseñada para bobinar alambre galvanizado en múltiples carretes pequeños, la SD-Z-300/36 maneja de 24 a 40 carretes simultáneamente a 45–75 m/min. Comúnmente utilizada en líneas de producción de cercas, mallas y alambre para ferretería.

Características principales

  • Maneja de 24 a 40 carretes simultáneamente
  • Diámetro del carrete Φ300–360 mm
  • Diámetro del alambre Φ0.4–1.2 mm
  • Velocidad del alambre 45–75 m/min
  • Accionamiento Y160M-6 / 7.5 kW

Especificaciones técnicas

Diámetro del carrete Φ300–360 mm
Velocidad del alambre 45–75 m/min
Número de carretes 24–40 pcs
Motor eléctrico Y160M-6 / 7.5 kW
Diámetro del alambre Φ0.4–Φ1.2 mm
Reductor JZQ350-2-2Z

Envíenos su rango de diámetro de alambre, material y producción requerida — nuestros ingenieros confirmarán la especificación exacta y la cotización en un plazo de 24 horas.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Máquina bobinadora de alambre galvanizado SD-Z-300/36”

Your email address will not be published. Required fields are marked *

Productos relacionados

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I match take-up capacity to my drawing machine?

Match it to the coil weight you actually handle. If the pay-off accepts 2.3 tons but the take-up fills at 800 kg, the line stops frequently. Line speed is also limited by the take-up, so an undersized take-up means the drawing machine never reaches its rated speed.

What is the difference between an I-wheel and an elephant trunk take-up?

An I-wheel take-up spools the finished wire onto a reel, which suits transport and storage. An elephant trunk take-up coils wire without a spool, which suits downstream processing where the coil is fed directly into another machine.

What spool sizes are available?

I-wheel take-up machines are available in 400, 630, 800 and 850 mm reel sizes, and vertical I-wheel units up to 1150 mm for large spools and heavy coils. The right size depends on the coil weight you need to handle.

Do I need equipment to move full spools?

Yes. A large vertical take-up produces a spool that needs handling equipment to move. If you do not have that equipment, a smaller I-wheel machine is the practical choice even where a larger one would be more efficient.

Can the take-up run continuously with the drawing machine?

It can, provided capacities are matched and the take-up speed follows the line speed. Tension control between the drawing machine and take-up matters, particularly on fine wire.

Is the take-up supplied with the drawing machine or separately?

Either. Take-up and pay-off equipment can be specified as part of a complete line or supplied separately to match a machine you already have. Give us the existing machine specification so the interface matches.

Scroll al inicio