SDJ Acid Free Sand Belt Rust Removal Machine

Máquina SDJ de eliminación de óxido con banda de lija libre de ácido

Desde $1,000

Máquina desincrustadora de banda de lija sin ácido para la limpieza de la superficie del alambrón.

Categoría:

From $1,000

⚙
Personalización disponibleTodos los parámetros se pueden adaptar a sus requisitos de producción. El precio final se cotiza según sus especificaciones confirmadas.

Descripción general

Elimina el óxido y la capa de óxido superficial del alambrón mediante bandas abrasivas de lija en lugar de decapado ácido. Esto evita la eliminación de residuos ácidos y proporciona una etapa de preparación más limpia y ambientalmente aceptable antes del trefilado.

Características principales

  • Proceso sin ácido — sin residuos de decapado
  • La banda abrasiva elimina el óxido y la cascarilla
  • Huella ambiental más limpia
  • Adecuada para la preparación de alambrón
  • Se integra con líneas de trefilado

Especificaciones técnicas

Modelo SDJ
Método Desincrustación con banda abrasiva
Ventaja Sin ácido — sin efluentes de decapado
Aplicación Preparación de la superficie del alambrón

Envíenos su rango de diámetro de alambre, material y producción requerida — nuestros ingenieros confirmarán la especificación exacta y cotizarán en 24 horas.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Máquina SDJ de eliminación de óxido con banda de lija libre de ácido”

Your email address will not be published. Required fields are marked *

Productos relacionados

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

Why is descaling equipment needed before drawing?

Incoming hot rolled wire carries scale, and drawing that scale through a die wears the die bore unevenly and drags broken scale into the lubricant where it scratches the wire. Descaling ahead of the drawing machine is one of the most effective ways to extend die life.

What is the difference between peeling and descaling?

Peeling removes the surface layer mechanically with blades or wheels, taking off scale and surface defects together. Descaling generally refers to removing oxide scale, which can be done mechanically, by sand belt or by other means. Peeling removes more material but leaves a cleaner surface.

What is a pointing machine for?

A pointing machine forms a tapered point on the wire end so it can be threaded through the first drawing die. Without a point, the wire cannot be started through the die. Rotary and hydraulic pointing machines cover different diameter ranges.

Why is boronization coating necessary?

The carrier coating holds lubricant to the wire surface during drawing. Dry lubricant alone does not stay on the wire at the pressure and temperature inside a die, so the coating is what keeps the lubricant film intact.

Can these machines be added to an existing line?

Yes. Descaling, pointing and coating equipment can be supplied to match an existing drawing machine. Give us the wire diameter range and line speed so the auxiliary equipment is sized correctly.

How much floor space does the equipment need?

It depends on the machine and whether it is in-line or standalone. Dimensions are stated in the specification for each unit, and we can advise on layout once we know your line arrangement.

Scroll al inicio