YSG-850 I-wheel Take-up Machine (Without Disassembly)

YSG-850 Mesin Penggulung Kawat Roda-I (Tanpa Pembongkaran)

Mulai $1,000

Mesin penggulung kawat roda-I Φ850 mm dengan penata kawat hidrolik — tidak perlu pembongkaran.

Kategori:

From $1,000

⚙
Dapat disesuaikanSemua parameter dapat disesuaikan dengan kebutuhan produksi Anda. Harga akhir dikutip sesuai spesifikasi yang telah Anda konfirmasi.

Ikhtisar

YSG-850 menggulung kawat ke roda-I Φ850 mm tanpa melepas roda dari mesin, sehingga menghemat banyak waktu penanganan. Penata kawat hidraulik dengan langkah 0–500 mm menata kawat secara merata. Cocok untuk kawat tembaga dari Φ1.5 mm hingga Φ8 mm.

Fitur Utama

  • Tanpa pembongkaran — roda tetap di mesin
  • Roda-I dengan diameter luar Φ850 mm
  • Penyusun kawat hidraulik, langkah 0–500 mm
  • Gaya dorong maksimum penyusun 25 kg
  • Motor utama 7.5 kW, pompa hidraulik 1.5 kW

Spesifikasi Teknis

Diameter penggulung Φ1.5–Φ8 mm (tembaga)
Langkah penyusunan kawat 0–500 mm (penyesuaian tanpa tingkat)
Diameter luar roda-I Φ850 mm
Diameter dalam roda-I Φ460 mm
Lebar roda-I 500 mm
Model motor 7.5 kW
Motor pompa oli hidrolik 1,5 kW
Gaya dorong maks. penyusun kawat 25 kg
Dimensi 2330 × 1500 × 1300 mm
Berat 1200 kg

Kirimkan kepada kami kisaran diameter kawat, material, dan keluaran yang dibutuhkan — insinyur kami akan mengonfirmasi spesifikasi pasti dan penawaran harga dalam 24 jam.

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “YSG-850 Mesin Penggulung Kawat Roda-I (Tanpa Pembongkaran)”

Your email address will not be published. Required fields are marked *

Produk Terkait

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I match take-up capacity to my drawing machine?

Match it to the coil weight you actually handle. If the pay-off accepts 2.3 tons but the take-up fills at 800 kg, the line stops frequently. Line speed is also limited by the take-up, so an undersized take-up means the drawing machine never reaches its rated speed.

What is the difference between an I-wheel and an elephant trunk take-up?

An I-wheel take-up spools the finished wire onto a reel, which suits transport and storage. An elephant trunk take-up coils wire without a spool, which suits downstream processing where the coil is fed directly into another machine.

What spool sizes are available?

I-wheel take-up machines are available in 400, 630, 800 and 850 mm reel sizes, and vertical I-wheel units up to 1150 mm for large spools and heavy coils. The right size depends on the coil weight you need to handle.

Do I need equipment to move full spools?

Yes. A large vertical take-up produces a spool that needs handling equipment to move. If you do not have that equipment, a smaller I-wheel machine is the practical choice even where a larger one would be more efficient.

Can the take-up run continuously with the drawing machine?

It can, provided capacities are matched and the take-up speed follows the line speed. Tension control between the drawing machine and take-up matters, particularly on fine wire.

Is the take-up supplied with the drawing machine or separately?

Either. Take-up and pay-off equipment can be specified as part of a complete line or supplied separately to match a machine you already have. Give us the existing machine specification so the interface matches.

Scroll to Top