YSG-850 I-wheel Take-up Machine (Without Disassembly)

Máquina bobinadora de rueda en I YSG-850 (sin desmontaje)

Desde $1,000

Máquina bobinadora de rueda en I de Φ850 mm con distribuidor hidráulico de alambre — no requiere desmontaje.

Categoría:

From $1,000

⚙
Personalización disponibleTodos los parámetros pueden adaptarse a sus requisitos de producción. El precio final se cotiza según sus especificaciones confirmadas.

Descripción general

La YSG-850 enrolla el alambre en ruedas tipo I de Φ850 mm sin desmontar la rueda de la máquina, lo que ahorra un tiempo considerable de manipulación. Un acomodador hidráulico de alambre con carrera de 0–500 mm coloca el alambre de manera uniforme. Adecuada para alambre de cobre de Φ1.5 mm a Φ8 mm.

Características principales

  • Sin desmontaje — la rueda permanece en la máquina
  • Rueda tipo I de Φ850 mm de diámetro exterior
  • Dispositivo hidráulico de distribución de alambre, carrera de 0–500 mm
  • Empuje máximo del dispositivo de distribución 25 kg
  • Motor principal de 7.5 kW, bomba hidráulica de 1.5 kW

Especificaciones técnicas

Diámetro de bobinado Φ1.5–Φ8 mm (cobre)
Carrera de distribución de alambre 0–500 mm (ajuste continuo)
Diámetro exterior de la rueda I Φ850 mm
Diámetro interior de la rueda I Φ460 mm
Ancho de la rueda I 500 mm
Modelo de motor 7.5 kW
Motor de la bomba de aceite hidráulico 1.5 kW
Empuje máximo del dispositivo de distribución de alambre 25 kg
Dimensiones 2330 × 1500 × 1300 mm
Peso 1200 kg

Envíenos su rango de diámetro de alambre, material y producción requerida — nuestros ingenieros confirmarán la especificación exacta y cotizarán en un plazo de 24 horas.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Máquina bobinadora de rueda en I YSG-850 (sin desmontaje)”

Your email address will not be published. Required fields are marked *

Productos relacionados

Request a Quote for This Machine

Send us your wire diameter, capacity and power supply requirements — we reply with price and lead time within 24 hours.

Send Your Requirements

Tell us what you need — we reply with price, lead time and shipping cost within 24 hours.

🔒 Your details are kept confidential and never shared. We reply within 24 hours.

Frequently Asked Questions

How do I match take-up capacity to my drawing machine?

Match it to the coil weight you actually handle. If the pay-off accepts 2.3 tons but the take-up fills at 800 kg, the line stops frequently. Line speed is also limited by the take-up, so an undersized take-up means the drawing machine never reaches its rated speed.

What is the difference between an I-wheel and an elephant trunk take-up?

An I-wheel take-up spools the finished wire onto a reel, which suits transport and storage. An elephant trunk take-up coils wire without a spool, which suits downstream processing where the coil is fed directly into another machine.

What spool sizes are available?

I-wheel take-up machines are available in 400, 630, 800 and 850 mm reel sizes, and vertical I-wheel units up to 1150 mm for large spools and heavy coils. The right size depends on the coil weight you need to handle.

Do I need equipment to move full spools?

Yes. A large vertical take-up produces a spool that needs handling equipment to move. If you do not have that equipment, a smaller I-wheel machine is the practical choice even where a larger one would be more efficient.

Can the take-up run continuously with the drawing machine?

It can, provided capacities are matched and the take-up speed follows the line speed. Tension control between the drawing machine and take-up matters, particularly on fine wire.

Is the take-up supplied with the drawing machine or separately?

Either. Take-up and pay-off equipment can be specified as part of a complete line or supplied separately to match a machine you already have. Give us the existing machine specification so the interface matches.

Scroll al inicio